Pool Deck Coatings & Resurfacing in San Francisco CA - a fresh surface on sound concrete
Faded, rough or stained concrete around your pool? We coat a sound deck with a textured finish instead of tearing it out.
- Licensed and insured.
- Free estimates at your property.
- We reply within 1 business day.
What does resurfacing a pool deck in San Francisco involve?
Pool deck coatings and resurfacing in San Francisco put a new textured acrylic surface over the concrete you already have, with a finish coat on top for color and protection. On a deck that's still sound, you get a fresh surface with some grip to it without breaking out the slab.
Most calls start the same way. The concrete around the pool has gone dull, picked up stains or a few cracks, and you're wondering whether it all has to come out. The price mostly moves with the deck's size, how much crack repair it needs, whether an old paint or sealer has to come off first, and how many colors or pattern lines you want. The schedule turns on the prep, the weather and the day the deck stays closed afterward. It depends on your slab, so your own figure and timing come from the estimate visit.
How can you tell your pool deck is ready for a new surface?
Faded, chalky concrete
The color has washed out and the surface feels powdery or rough on bare feet. That's usually the top of the concrete wearing down from sun, water and pool chemicals, and the longer it goes, the more the surface opens up to stains and dirt.
Hairline cracks spreading out
Thin cracks running across the deck usually mean the slab has moved a little, which most decks do. Caught early, they can be filled and worked into a new coating, but water getting into them through the rainy months can widen them until the slab itself is the problem.
Peeling paint or sealer
Flakes lifting near the pool edge or where water sits mean an old coating has let go, usually because something under it wasn't right. Leave it and more of it lifts, and all of it has to come off before anything new goes down.
How we handle pool deck coatings and resurfacing
I start by checking that the deck is still solid, because a coating renews a sound slab and won't fix one that's breaking up. If yours is sound, I show you how a textured coating compares with tearing the concrete out and how the finish gets its grip underfoot, so you can weigh both before you decide. Then our crew cleans the deck down to bare, sound concrete, repairs the cracks, sprays on the textured acrylic coat and follows with a finish coat for color and protection. We handle the wash water from that cleaning the way the city expects, which I explain further down.
If an old paint or sealer is flaking, we take it off first with concrete floor stripping and removal, since a new coat holds only as well as what's under it. The testing and prep are the same ones we do before epoxy floor coatings in garages and basements, so if an indoor floor is on your list too, mention it at the visit.
Textured coating over a sound deck
This suits a deck that's dull, stained or lightly cracked but still solid underfoot. You keep the slab you have and get a new color and texture on top, without the mess of a tear-out.
Strip first, then coat
This suits a deck that already has a painted or sealed finish that's peeling. Taking the old coating off adds a step, but a new one laid over loose paint would only let go along with it.
Find out if your pool deck can be coated
Send the form and we'll reply within 1 business day to set up a free estimate at your property. There's no pressure and no obligation, whatever you decide after the visit.
(415) 918-5395What San Francisco asks of pool deck resurfacing
Cleaning a deck before coating means washing it down, and in San Francisco that water is regulated because it can end up in the city's combined sewer. The San Francisco Public Utilities Commission issues the permits for temporary discharges like power-washing, and projects under the size the city sets for its construction runoff permit don't have to apply for one but still have to use the runoff practices that fit the site. Contractors, site supervisors and property owners who are careless with those practices can be cited, with civil penalties up to $25,000 a day including cleanup costs. Permit questions come up at the estimate, and when a job needs one, we help you work through it and handle the wash water the way the city expects.
We're based in San Francisco and work in the cities around it, down the Peninsula and across the Bay in the East Bay. Pool decks here tend to sit in tight backyards, side yards or shared courtyards, so we plan how the crew gets equipment in and how people get around a closed deck. We plan the same way on jobs in Hillsborough and Oakland.
What happens after you call about your pool deck?
Reach out by phone or form
Call (415) 918-5395 or send the form with a line about what's going on with the deck. We get back to you to set up a time for me to come out.
I check the deck in person
I look over the deck, check the slab for moisture and old coatings, and walk you through your options and what each one means for your schedule. You see what's driving the price before you decide anything, so you know what you're paying for.
Our crew preps and coats it
Our crew prepares the concrete, puts down the system we agreed on and cleans up, with a lead installer running the job each day. When it's done, we show you how to care for the new surface and when it's ready to walk on.
Frequently asked questions
How do I know if my pool deck can be resurfaced instead of replaced?
If the concrete is still structurally sound, it can usually be coated instead of torn out. One coating maker presents spray-on textured overlays as a way to renew dull, sound concrete without the mess and expense of full removal, so it makes sense to price a coating before paying for a tear-out. If your slab is breaking up, I'll tell you a coating isn't the answer.
How much does pool deck resurfacing cost in San Francisco?
It depends on your deck, and the price comes down mostly to its size and condition. Crack repair, stripping an old peeling coating, extra colors or pattern lines and tight access all add to it, while a sound, clean deck in one color keeps it down. Your own figure comes from the estimate visit.
Is a resurfaced pool deck slippery when it's wet?
A textured acrylic finish is made to give your feet grip, not to be slick. In one maker's system, the sprayed texture gets knocked down with the edge of a trowel to make a surface that's slip resistant and comfortable to walk on, and that maker says it's comfortable for bare feet and cooler than concrete, brick or tile. When you compare finishes, ask how each one is textured for grip.
How long does a new pool deck coating take before you can walk on it?
Plan on keeping people off the deck until the next day. That's what the maker of one spray deck product says is best, so the pool deck usually stays closed through the first day after we finish. If the pool is shared, let your neighbors know ahead of time.
Can you hide cracks when resurfacing a pool deck?
Often, yes, by working them into the deck's pattern instead of trying to make them vanish. One maker says lines scored into the surface, called scorelines, can take in existing cracks, and added acrylic colors help camouflage them. We look at where your cracks run before we lay out any lines.
How do I take care of a resurfaced pool deck?
Mostly by keeping it rinsed and swept, because a good finish coat keeps grime from soaking in. One maker says its non-porous acrylic finish coat keeps dirt, oils and chemicals out of the surface, which cuts the time and money spent on upkeep. Ask whether the finish coat you're quoted is non-porous, since that shapes the care later on.
San Francisco, CA
Book an estimate for your pool deck
Have the deck's rough size, a few photos of the cracks or worn spots, and whether the pool is private or shared ready, and we can plan the visit around what you need.